Systems

Ship weather station ″Periscope″

Periscope / Periscope

Ship weather station ″Periscope″

The Periscope ship weather station is designed to measure, collect and display weather data.

Features and advantages

— Touch screen 8” or 10.4”, trackball (with adjustable pressure)/mouse
— Data output in NMEA format
— Data from weather sensors are obtained in NMEA, ASCII formats
— Built-in heating for operation in cold environment
— Received data are recorded in the ship’s log and exported into XLS format
— Pictorial or graphical types of data presentation (figures or line graphs)
— Different measurement units at option
— Water temperature sensor and 5 meteorological sensors are optionally available
— Some sensors are equipped with built-in GPS-receivers (gyrocompass and log connection is not required to define ship speed and course and calculate true wind parameters).

Digital integrated Command Talk-Back System

UNITALK / UNITALK

Digital integrated Command Talk-Back System

Digital talk-back public address system

— Talk-back public address communication for any navigational area
— The system includes units for humid and/or noisy areas, e.g. open decks
— ISDN communication.


Features and advantages

— Several central units can be combined into a single system and operate together
— Main stations with priorities
— Individual or group selective calling
— Interfacing with external systems (command public address system, VDR, PBX, general alarm system, entertainment sources)
— Direct-pair communication without connection to the central unit
— A user can call at any station using dialing units.


Main stations

— The stations can also be used as substations
— Left and right wing stations allow a ship’s master to keep communication on at a distance from the main control panel, e.g. while docking
— System status indications.


The system

— All stations can be easily connected to the central unit
— High jamming resistance, reliability and perfect communication quality
— Up to 700 m of communication lines
— The system can be installed using current cable passages.

External sound reception system

NS-201 / NS-201

External sound reception system

External sound reception system

The system receives external sound signals from all directions within bandwidth 70-820Hz, rebroadcasts the received signals to the appropriate location and equipment, indicating the sound signals source direction in relation to the vessel.


Features and advantages

— The basic system includes a sound signal receiver (main unit) and microphone unit
— 3 compact omnidirectional microphones are combined in a compact unit
— Signals are received within of 70-820 Hz (2100 Hz - at option), other signals are disregarded by the system
— Built-in heating allows sensors to operate in cold environment
— Additional repeater and loudspeaker can be connected.

Controls

— Trigger threshold (exceeding the noise level)
— Loudspeaker volume
— Backlight of the control buttons.

Advanced isolated operator workstation

YKRM-1 / YKRM-1

Advanced isolated operator workstation

YKRM–1 is an advanced isolated operator work station with a wide range of functional capabilities.
The convenient and efficient arrangement of the controls and display elements enables the operator to observe the situation as a whole and react promptly.

The work station is compatible with the electronic map-making systems and Multitouch dispatching equipment. Besides the touch screen control, УКРМ-1 includes two classic industrial-version keyboards with trackball. Such organization of the controls will provide comfortable working environment even for the most conservative users.

The external LED lighting and the brightness of the desk-integrated display may be adjusted to provide comfort operation at any time of day and night.

Apart from the electronic systems, УКРМ-1 is equipped with drawers to store paper maps, books, manuals and navigation instruments.

YKRM-1 is manufactured either in "standing” or "sitting”-operation configuration. Customer solutions are also possible.

Further improvement of УКРМ-1-based functionality may be achieved by installing extra LCD’s and indicators in inclined vertical view plane and installing special controls for efficient solution of every single task.


Possible applications:

— Chart table
— Vessel traffic management system operator’s station
— Dispatching station
— Station of emergency assessment, management and forecasting
— Decision-making station/Captain’s (commander’s) station
— Training complex element
— Action control station, e.g. for unmanned aircraft.

Battery less telephone system

BTS-1006 / BTS-1006

Battery less telephone system

The BLTS-1006 battery less telephone system ensures telephone communication both in routine operation and emergencies in of internal communication systems or power failure.
Features:
— The system provides pair, broadcast, selective and conference communication (max. 24 stations)
— The system can be used for public address
— Communication and addressed calls from any system unit
— Communication in harsh environments:

— when respiratory protection is on (using portable communication devices with microphones)
— in noisy areas, max. 130 dB (using a headset or intercom helmet)

— LEDs for power, call and inductor state of health
— Light and sound signals for incoming calls
— A headset and external in-call light signaling units can be connected
— Automatic switchover to standby power in of power supply failure
— Different configurations of telephone networks (subscribers are connected by dedicated or multiple channels)
— Different types of mounting => hinge, desktop or console; on open decks or inside, including noisy areas

Public Adress System/Command Talk-Back System, type TPA-1007

TPA-1007 / TPA-1007

Public Adress System/Command Talk-Back System, type TPA-1007

Command public address system TPA-1007 ensures command and entertainment broadcasting, alarm signaling and talk-back public address communication.

Features and advantages:
— Installation on sea and river-going vessels of any navigational area
— Digital communication with high-noise immunity
— Wide-range communication (up to 700 m)
— 6 independent zones
— Built-in power amplifier 200 W or 400 W, transmission zone voltage 100 W
— Built-in sound alarm generator
— Optional pre-monitoring of zones
— Ready for instant operation
— Interfacing with external ship systems (Automatic Telephone System (ATS), Voyage Data Recorder (VDR), Integrated Marine Automation Systems (IMAS))
— The System can be installed using existing cabling (in of ship amendment)
— External radiobroadcast units and audio recorders can be connected.

Public address system/ general alarm system, type TPA-1907

TPA-1907 / TPA-1907

Public address system/ general alarm system, type TPA-1907

Public address system / General alarm system TPA-1907 is designed to provide command broadcasting, talk-back public address communication and alarm announcements on sea and river-going vessels of all navigation areas.

Features and advantages:
— Installation on sea and river-going vessels for all navigation areas
— Digital communication with high-noise immunity
— Wide-range communication (up to 700 m)
— 6 independent zones
— Built-in power amplifier 200W or 400W, zone voltage 100V
— Built-in sound alarm generator
— Prior quality control of transmitted messages
— Ready to operation within 10 sec
— Interfacing with external ship systems (Automatic Telephone System (ATS), Voyage Data Recorder (VDR), Integrated Marine Automation Systems (IMAS))
— The system can be installed using current cable passages (in of ship amendment)
— External radiobroadcast units and audio recorders can be connected.

Hospital and refrigerator alarm system

SCS-1002 / SCS-1002

Hospital and refrigerator alarm system

System SCS-1002 is designed for application on sea and river-going ships. It supplies in-call signals to watch officer station from button controllers, located in refrigerator machines rooms, ship’s hospital and other areas where restricted mobility or life threat occurThe System can be used for other purposes where remote alarm signals are required.

System features:
— Signal from remote calling station is supplied immediately, displaying the name of station as well
— call alarm is repeated on the duplicate device
— reception and control device can display up to 32 remote stations at the same time
— sound signal of alarm can be muted from control or duplicate devices
— call alarm can be reset from the call site or reception and control device
— connection with remote button controllers can be displayed on reception and control device and duplicate device
— warning signal is supplied in of signal circuit failure
— alarm signal is duplicated by external light, sound and sound-light devices.

Ship’s Automatic Telephone Exchange (PABX), type ITS-1004

ITS-1004 / ITS-1004

Ship’s Automatic Telephone Exchange (PABX), type ITS-1004

The ITS-1004 automatic marine telephone system ensures telephone communication between rooms and stations of submarines, vessels of all classes, and with users of coastal telephone networks during anchorage. The system can be also used for industrial applications.

Features:
— Up to 64 analogue users, up to 12 external lines
— Wide range of internal and external line combinations
— Automatic switchover to standby power
— Integration with command public address and loudspeaker systems (ICB-131 and TPA-1007) produced by OOO “NPK “MSA”
— The system is PC programmed
— Communication can be established by wired line and radio channel
— Value added services.

Digital integrated shipboard communication system, type ITS-1010

ITS-1010 / ITS-1010

Digital integrated shipboard communication system, type ITS-1010

The system offers

Public address communication in the following modes:
— pair communication mode allowing additional users to be quickly connected to a conference call
— selective or pre-defined conference call
— broadcast communication (commands are transmitted to all substations and all zones)
— emergency call.


Automatic telephone communication in the following modes:
— pair communication (forwarding call, forwarding call if the line is busy, return call, number repetition, abbreviated dialing, etc.) and priority caller
— selective or pre-defined conference call.


Radio telephone communication (RTC) with following capabilities:
— providing an extension (via base unit) to internal telephone sets (including other RTC devices)
— intercommunication within one base unit (the line is not busy).


— automatic telephone line with coastal stations
— video communication (using telephone sets of PT-VC type and digital PoE lines)
— announcement can be provided from user substations and PBX sets (requires external public address unit – at option)
— communication between users of loudspeaker system and PBX
— incoming call is indicated by external light and sound units
— automatic recording of voice messages
— administration, settings and diagnostics of the system are made by a PC.

Bridge Navigational Watch Alarm System

BNWAS-1009 / СКДВП-1009

Bridge Navigational Watch Alarm System

Bridge Navigational Watch Alarm System (BNWAS) is designed for remote monitoring of bridge watch activities and detect Officer on the Watch (OOW) disability which could lead to marine accidents.

The OOW responds to supplied signal pre-set within 3 - 12 minutes intervals by pressing reset button. If the OOW fails to respond, visual and audible alarms will be generated in the wheelhouse in order to inform backup officers of the watch officer’s incapacity.

Thruster remote control system TCS-1011

TCS-1011 / TCS-1011

Thruster remote control system TCS-1011

Thruster control system TCS-1011 controls the thruster, direction and speed of propeller rotation (by sending control signals to frequency converter), and all thruster units (frequency converter, electric motor, lubrication system, etc.).
TCS-1011 has three types of control:
— Local – using control panel of the local switchboard 1005-LSU
— Remote – using one of remote control stations RCS in the wheelhouse and / or other ship rooms
— Automatic – by dynamic positioning system and/or Joystick System.


Local control panel of switchboard LS is equipped with 8” resistive touch screen, produced by “NPK MSA”, and duplicating pointer indicators and controls.
Microcontrollers of TCS-1011 are based on state-of-the-art processor with performance 180 mln flops. The system is created according to modular design principle with modular dual redundancy. The number of internal modules can be changed to increase input or output signals from thruster sensors and external ship systems.


Features:
— Certificated by RMRS
— Modular design principle with dual redundancy
— Wide range of supported interfaces: RS-422/485 (Modbus, Profibus, NMEA), 4…20 mA, dry contact relays
— Compliant with dynamic positioning system and other ship systems: VDR, electrical power system (EPS), integrated control system for technical facilities (ICS TF), alarm warning system (AWS), conning display, etc.
— Based on state-of-the-art high-performance processor
— Uninterruptible PSU provides autonomous power up to 30 minutes
— Software self-test of the System
— Non-volatile error and alarm history.

Ship Security Surveillance TV System

2003-DVS / 2003-DVS

Ship Security Surveillance TV System

Ship Security Surveillance TV System
The System ensures remote surveillance solutions for any vessels.


Features:
— Active monitoring of the secured areas from the local control room
— Audio and video data recording in video server and remote client via Ethernet network
— Data storage and playback
— Motion detection
— Light and sound alarms in of power or equipment failure
— Remote control of cameras, wipers and pan / tilt platforms via RS-485 and Ethernet
— 1 month data storage
— Record keeping (log)
— Parameters restore from non-volatile memory in of power loss


Video cameras features:
— Video and audio data delivery via Ethernet network
— Automatic night surveillance mode
— External microphone can be connected
— External sensors (dry contact type) can be connected