CC-1000
Charging connector
Description
Charging connector CC-1000 with water-cooled cables and contacts ensures fast charge of a vessel. The connector provides high constant charge current – up to 1200 А, voltage up to 1000 V, in the thermal stabilization mode, not short-time operation.
Charging system is based on glycol water cooling system. Cooling of a charging cable is carried out by means of two coolant hoses (input and output) with power cables inside them. Integrated temperature sensors monitor heat generation on the power contacts.
Protected against external factors, the connector is outfitted with changeable contacts, integrated safety system with a connector blocking, overheating and leakage protection, as well as additional information contacts to transmit data to the coast. The connector will perfectly fit the vessel serviced by one person.
Specifications
| Operating current (continuous) | 1200 А |
| Peak current (10 sec) | 3000 А |
| Rated voltage | 1000 V DC |
| Power supply (current consumption) | 24 V DC |
| Gun weight (w/o cable) | <7,5 kg |
| Max. cable length w/o cooling | 150 mm ±5 mm |
| Hose OD | 2х42 mm, 1х32 mm |
| Min. bend radius | 400 mm |
| Ambient temperature (when in operation) | -25 °С… +55 °С |
| Ambient temperature (storage) | -40 °С… +70 °С |
| Charging cycles | >2000 |
| IP rating (plugged in) | IP 56 |
| IP rating (unplugged) | IP 24 |
| Temperature sensors | 2хNTC |
| Cooling power (3 m) | 2100 W |
| Cooling power (6 m) | 3400 W |
| Cooling power (9 m) | 4600 W |
| Cooling power (11 m) | 5500 W |
| Flow rate | 20 l/min |
| Operating pressure | 1…2 bar |
| Liquid temperature on the inlet | +10…+20 °С |
| Cooling liquid (Classification G12/G12+, OAT additives) |
50% water; 50% glycol, min. 30% (good practice of anti-freezing protection up to -30 °С) |