CH-105-24
Automatic Battery Charger
- Description
- Specifications
- Files
- Support
- Where to buy
The CH-105-24 automatic battery charger operates with single-phase mains of 24 VDC, depending on the design. It is used to charge different storage batteries automatically, providing a max output power of 500 W and an output to connect load. The unit is equipped with a built-in control and indication panel to set the charging modes and display the storage battery status. The CH-105-24 can be optionally equipped with the external control panel BCP-136. Install in a dry environment (IP22). The device has a reverse polarity protection of the main power and storage battery, and a current overload protection. Deep discharge and overheat protection are optional (provided that the thermal sensor DTS-135 is used).
|
Parameter |
Value |
|
|
24 (19 to 36)1) |
||
|
Power consumption, W |
690 |
|
|
Max. output power, W |
500 |
|
|
Charge voltage DC, V |
9 to 30 |
|
|
Charge current, А |
0.2 to 16.0 |
|
|
Rated capacity of recharged batteries, А·h |
max.160 |
|
|
Max. charge time of SB, h |
10 |
|
|
Measurement error |
current, А |
±0.2, max. |
|
voltage, V |
±0.1, max. |
|
|
Accuracy ofadjustment |
current, А |
0.1 |
|
voltage, V |
0.1 |
|
|
Alarm signaling |
Built-in: relay contacts, sound signaling, light signaling; External (connected) devices: AU-106 or AU-206, BCP-136 |
|
|
Protection degree |
IP22 |
|
|
Weight, kg |
6.3 |
|
|
Operating temperature, °С |
–15 to +55 |
|
|
Limiting temperature, °С |
–60 to +70 |
|
|
Mounting |
wall |
|
|
1) Supply voltage range is given in parenthesis. |
||